Water Sensor (EU)
3-Series Water Sensor (EU)
Prevent expensive flood damage.
Protect your home from expensive leaks and floods by installing a 3-Series Water Sensor near water heaters, drain pans, and underneath sinks. The Water Sensor is small, easy to use, and fits almost anywhere. Place the sensor directly on the ground, and it will notify you when it detects the presence of water.
How does a water leak Sensor work?
The Water Leak sensor detects the presence of water when placed in locations where water should not present a leak. When Wi-Fi is enabled, the sensor can send a notification to the homeowner through a smartphone app.
Water Leak Detector Easy Placement
The water leak detector can be placed on any non-conductive surface. it’s as simple as joining and placing it in a low spot or near an appliance such as a washing machine, refrigerator, or water heater.
What is a Water leak Detector Alarm?
It will Automatically shut off the home’s water supply in case of a leak.
If the Water Leak Detector detects a leak in the tank, it can trigger the whole-home water shut-off valve to disconnect the water supply. This protects your home against leaks and flood damage, even when you’re away from home or unaware that there’s a problem.
Pull-to-pair join process
All Zigbee 3-series sensors feature “pull-to-pair” joining. The device ships with the battery pre-installed, and all that is needed to begin the joining process is to pull out a small plastic tab from the bottom of the device. There is nothing for the user to take apart or put back together.
Ensure that A/C drain pans don’t overflow.
With optional remote leads, you can place the Smart water Leak sensor in areas where there is typical standing water. A/C drain pans contain some water under specific operating conditions, but with the 3-Series Water Sensor, you can be notified when the water reaches an unacceptable level.
ZigBee Smart Home Automation 1.2 Compatibility
Superior Range and easy updatability
Prevent flooded basements when sump pumps fail.
Many homes with basements have water entry issues requiring using automatic Water Leak Sensor sump pumps to remove water. When these pumps fail, the rising water level can trigger notifications using the 3-Series Water Leak Sensor.
How does a water sensor detect water Leaks?
A common design is a small cable or device that lies flat on a floor and relies on the electrical conductivity of water to decrease the resistance across two contacts. The device then sounds an audible alarm and, together with providing onward signaling in the presence of enough water to bridge the contacts.
Water Sensor Do-it-Yourself Installation
The 3-Series Water Leak Sensor Alarm is designed to be installed by anyone, not just professionals.
Most users can install and pair the Centralite water leak sensor in about 10 minutes.
Open the hub for joining and pull the plastic tab from the device.
Place on any surface near a water source.
Related Resources
Water sensor Specifications
Dimensions
Wireless
Features built-in ZigBee repeater.
Power
Compatibility
The 3-Series Water Sensor features out-of-the-box compatibility with any ZigBee HA 1.2-certified hub, controller, bridge, or platform.
Environmental
Humidity Range: 0 to 90% R.H. (non-condensing)
Warranty
In the Box
- 1x – 3-Series Water Sensor
- 1x – CR-2 Battery (pre-installed)
- 1x – Quick Start Guide
*Some ZigBee HA 1.2 platforms and hubs require device-specific whitelisting. Refer to the compatibility chart to ensure this device is compatible with your system.
**Refer to reseller documentation for specific warranty guidelines and rules.
Downloads
3-Series Water Sensor – DatasheetSupport
Call us:
877-466-5483Support us:
support@centralite.com