Knowledgebase
Centralite.com | All together now > CentraLite Help Desk > Knowledgebase

Search help:


» Category: LiteJet Installation  (Go back)

» Articles in this category:

 
LiteJet Keypad Color Code Article rated 3.2/5.0
What is the color code to wire the LiteJet Keypads? LiteJet Keypads only require a standard straight-through eight-conductor Cat5 cable.We recommend that you use a standard Ethernet 568A or 568B schem...
LiteJet Keypad Wiring Article rated 3.2/5.0
What kind of wire do I use to connect LiteJet Keypads with the MCP? LiteJet keypads are homerun back to the LiteJet MCP using CAT5 cables.  There are RJ45 jacks on the MCP and on the backs of th...
LiteJet Keypad cable Pinout Article rated 3.3/5.0
What is the pinout for the LiteJet Keypad connection to the LiteJet Master Control Panel (MCP)?Looking at the connector with the locking tab at the bottom, the pins are, from left to right: 1, 2, 3, 4...
Wiring (3) 2-button Keypads Article rated 3.1/5.0
How do you wire three (3) 2-button keypads to a single LiteJet Keypad Jack? Here is a link to a document that explains it:
LiteJet48 Keypad Options Article rated 3.2/5.0
I need to install a 6-button keypad next to an Elan Z100 keypad.  The Elan keypad uses a single-gang Decora faceplate.The Europa-style keypads are not able to be ganged with Decora style controls...
Can I Use Arc-Fault Breakers with CentraLite? Article rated 3.2/5.0
Electrical codes are requiring Arc Fault circuit breakers in more locations within the home.  How can I use Arc Fault breakers with lighting loads controlled by CentraLite? Arc Fault breakers are now...
Can I Control Electronic Low Voltage Lighting from LiteJet? Article rated 3.2/5.0
I've heard that Electronic Low Voltage lighting can be a problem with Dimming Systems. LiteJet can dim most Electronic Low Voltage Transformers.  LiteJet can dim all Magnetic Low Voltage Transfo...
Connecting Backlit Keypad Article rated 3.2/5.0
How do I connect a Finesse Backlit Keypad to LiteJet? See the attached document for instructions on how to connect the Finesse keypads to the LiteJet system.
LiteJet Fan Speed Installation Instructions Article rated 3.2/5.0
Where can I find information about the LiteJet FSC-2?
What are the load ratings for the relays in the LiteJet HVRB? Article rated 3.3/5.0
The Litejet Version of HVRB is rated as follows per UL 50A Max Per Board at 277VAC 8.33A per relay using all 6 relays up to 277VAC 15A per relay using only 3 alternating r...
Wiring instructions for the LJ HVRB Article rated 3.3/5.0
See the attached diagram for the wiring instructions for the LiteJet HVRB
Maximum distance of components from LiteJet MCP Article rated 3.5/5.0
What are the maximum distance the components can be from the LiteJet MCP? The maximum distance the components can be from MCP are: High voltage relay board - 1,000 feet Low voltage relay board ...
 

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid