Installing JetStream on Vista 64 or Windows 7 64-bit

Solution How do I install JetStream on a Vista 64 or a Windows 7 64-bit machine ? [--- UPDATED: 3/31/2010 9:32:41 AM BY AGENT: Anthony D'Lima ---]

First download the JetStream software, then go to:
http://telegesis.com/telegesis_zigbee_technology_-_technical_support_/software_download.htm
and download the signed driver for XP, Vista, and Windows 7. After downloading this signed driver for the 64-bit OS, there should be no need to have the computer in F8 mode anymore. (F8 mode is a workaround, allowing the use of unsigned drivers. Since this driver is signed, there is no further need for this workaround. F8 mode is described below.)

[--- UPDATED: 12/16/2009 10:16:39 AM BY AGENT: Anthony D'Lima ---]

To load JetStream on a Vista 64 machine, follow these steps: Access the Advanced Boot Options menu by pressing F8 during the boot process. Then select Disable Driver Signature Enforcement. These steps just disable driver signing for the current boot only and every time that you need to run JetStream on a Vista 64 machine, you will have to follow these steps.

Was this article helpful? yes / no

Article details

Article ID:	605
Category:	JetStream Installation
Date added:	2009-07-02 13:34:54
Views:	3142
Rating (Votes):	(173)

« Go back