Knowledgebase
Centralite.com | All together now > CentraLite Help Desk > Knowledgebase

Search help:


How to restore the Car Visor Remote to factory default settings?

Solution How do I restore the Car Visor Remote back to the factory default settings?


There are two ways to restore the Car Visor Remote to factory default settings.  They are:

1)     When the Car Visor Remote has been discovered in the JetStream program; simply rename it to DEFAULT (space) DEVICE.  Then tap the first and third buttons on the remote at the same time.  Doing this will set the Car Visor Remote back to the factory default settings.

2)     Undo the back of the Remote, and then take out the batteries.  Next, while pressing and holding any one of the buttons on the remote, reinstall the batteries, one at a time.  Keep holding down the button till the LED stops blinking.  Once the LED stops blinking, you can test and see if the Car Visor Remote has been reset to the factory default setting by tapping any button on the remote; if the LED blinks six times, then the Car Visor Remote has been successfully set to the factory default setting.

"""
 
Was this article helpful? yes / no
Article details
Article ID: 364
Category: JetStream Programming
Date added: 2008-02-25 21:07:19
Views: 1192
Rating (Votes): Article rated 3.4/5.0 (55)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid