Knowledgebase
Centralite.com | All together now > CentraLite Help Desk > Knowledgebase

Search help:


Discovering devices after reset

Solution I reset a StarLite MCS, and now I cannot discover any of the devices.

If the devices have already been discovered, then you must also reset the devices.

You can do so by following the guide provided below.

 Note: Air Gap Switch is the slide located at the bottom of the

Keypad and Dimmer Modules.

 

HOW TO RESET STARLITE SWITCHES TO DEFAULT STATUS

OR TO RELEASE CAPTURED SWITCHES

1.   Move air gap switch at bottom of switch to the left. (Red Line

will appear.)

2.   Press and hold the top button on the switch, and move air gap

switch to the right.

3.   Hold the top button for 13 seconds and release.

4.   Reset is complete when the top LED flashes at a slow rate.

"""
 
Was this article helpful? yes / no
Article details
Article ID: 181
Category: StarLite Troubleshooting
Date added: 2006-10-27 06:02:20
Views: 2144
Rating (Votes): Article rated 3.4/5.0 (57)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid