Knowledgebase
Centralite.com | All together now > CentraLite Help Desk > Knowledgebase

Search help:


LiteJet Keypad cable Pinout

Solution What is the pinout for the LiteJet Keypad connection to the LiteJet Master Control Panel (MCP)?


Looking at the connector with the locking tab at the bottom, the pins are, from left to right: 1, 2, 3, 4, 5, 6, 7, 8.

Pins 1 and 8 are common grounds.  Pins 2 through 7 are button signals for Buttons 1 through 6, respectively.

Making a contact between pins 2, 3, 4, 5, 6, or 7 and pins 1 or 8 will result in LiteJet sensing a switch press.

----------------------------------------------------

-                                                                 -

-   1      2      3      4      5      6      7     8   -

----------------------------------------------------

                           ------------

On the six switch Keypad:

·        Button one is top left

·        Button two is middle left

·        Button three is bottom left

·        Button four is top right

·        Button five is middle right

·        Button six is bottom right

 

"""
 
Was this article helpful? yes / no
Article details
Article ID: 17
Category: LiteJet Installation
Date added: 2004-12-14 13:01:17
Views: 2745
Rating (Votes): Article rated 3.3/5.0 (63)

 
« Go back

 
Powered by Help Desk Software HESK - brought to you by Help Desk Software SysAid